Home > Các game casino-Casino có bịp khôngLightning protection > AC Surge Filtering Devices > Coordination Inductors-RFI filtering

Các game casino-Casino có bịp không

Coordination of Surge Protectors. In order to provide maximum protection efficiency, it is necessary to create a «coordination» diagram, that means installation of a «primary» SPD at the network entrance and a «secondary» close to sensitive equipment . . .

ATLINK 35 Decoupling inductor for SPD power supply coordination

Model: AT-8435 - Origin: AT3W / Spain

ATLINK 35 inductors provide decoupling between SPDs when they are connected in parallel at a same line. Protection categories according to REBT: I,II,III,IV .Nominal voltage 230Vac. Withstanding the lightning current and reducing the overvoltage to an acceptable level for the connected equipment. Impulse coordinated current (10/350μs wave): 100kA, maximum current (wave 8/20μs): 100kA. Uc=255Vac, L=15µH, R=3mΩ. Maximum working current 35A. DIN rail. ATLINK inductors are to be installed in series with the LV power supply line. . Detail

ATLINK 63 Decoupling inductor

Model: AT-8463 - Origin: AT3W / Spain

ATLINK 63 inductors provide decoupling between SPDs when they are connected in parallel at a same line. Protection categories according to REBT: I,II,III,IV .Nominal voltage 230Vac. Withstanding the lightning current and reducing the overvoltage to an acceptable level for the connected equipment. Impulse coordinated current (10/350μs wave): 100kA, maximum current (wave 8/20μs): 100kA. Uc=255Vac, L=15µH, R=3mΩ. Maximum working current 63A. DIN rail. ATLINK inductors are to be installed in series with the LV power supply line.. Detail

DSH Coordination Inductors

Model: DSH - Origin: CITEL / France

Citel's DSH are specially designed to control the implementation of the primary and secondary level of DS surge protectors. They are necessary in special case where the coordination cannot be accomplished using the "natural" inductance of the active conductors (in particular in small volume). For use with the DS series, 35 A (DSH35), 63 A (DSH63), 100 A (DHS100) and 2 x 16 A (DSH2x16) . Detail

Chia sẻ thông tin này

Lightning protection

Surge Protection for BTS

Surge Protection - Industrial sites

SPD Installation and Rules

Choosing Surge Protectors

Partners