Home > Lightning protection > AC Surge Protectors > CITEL Type 2 DIN Rail AC Surge Protectors

Các game casino-Casino có bịp không

CITEL surge protectors Type 2 & 3 are designed to be installed at the beginning of the installation, in the main switchboard, or close to sensitive terminals, on installations without LPS (lightning rods ). These protectors are tested following the Class II test from IEC61643-11 or EN61643-11standards and based on 8/20 μs impulse current injection.

« ‹ 1 2 3 › »

DAC50VG-20-275 Type 2+3 AC surge protector - Single-phase - VG

Model: DAC50VG-20-275 - Origin: CITEL / France

. Detail

DAC50 Series Type 2 AC surge protector - Three phase

Model: DAC50 Series - Origin: CITEL / France

. Detail

DS40 AC surge protector

Model: DS40 - Origin: CITEL / France

DS40 surge protectors are used mainly for distribution panels of single-phase networks. They provide common-mode protection (between the active conductors and ground) and are available with an option remote alarm. The DS40 is built with a plug-in module and a fixed base, which allows for easy access to protection modules, In: 20kA, Imax: 40kA, Pluggable module for each phase.. Detail

DS71R AC surge protector 70kA

Model: DS70R - Origin: CITEL / France

CITEL DS70R: Type 2 Surge Protectors are designed to be installed at the origin of the Low Voltage system or close to sensitive equipment to protect against transient voltages coupled into the Low Voltage network. The DS70R is connected between L/N. DS70R are to install parallel with with the low voltage supply line single phase lines-230V (L/N). Nominal discharge current 15 x 8/20 μs impulses iN=30 kA. Maximum discharge current max. withstand 8/20 μs Imax=70 kA. Up=1.4kV, tr <25ns, Uc= 255Vac.. Detail

Including 18 product(s) in this category

« ‹ 1 2 3 › »

Chia sẻ thông tin này